Even the best kept stone and tiled flooring can start to show signs of wear and tear. Spillages and day to day traffic can cause the appearance of your floors to dull. Dirty grout lines can seem impossible to keep clean. Ground in dirt will not come off the floor no matter how many times you scrub it.
At Alliance Restoration we can deep clean your tiles and grout to a professional standard and, if required seal them so that they stay that way. We clean all types of natural stone, Quarry tiles, Ceramic and Porcelain tiles, Amtico, Karndean, Safety flooring.
As no two floors are the same there are a number of factors to look at when it comes to your floor – the type and age of the flooring, are there any existing sealants that need to be removed prior to cleaning?,What type of finish would you like us to achieve? Following a visit and flooring appraisal from our Technician we are then able to tailor the cleaning process to suit your particular cleaning requirements.
There are a number of processes involved in the restoration of your floors
- The solution is applied to the floor and left to dwell
- Using a rotary machine with a variety of abrasive pads and brushes the tiles and grout are deep cleaned. This process is repeated as many times as required until the floor is fully stripped/clean. Edges and corners are finished by hand along with any grout lines that require extra cleaning.
- The floor is then rinsed with clean water and the slurry is extracted using a powerful vacuum.
- Once dry the floor is ready to be sealed. This is done either by hand or using an applicator depending on the flooring type. We normally apply 3 – 4 coats depending on customer requirements. Further coats of sealant can be added to high traffic areas if needed.